You’re not here for something fresh off the mill. You want wood with grit, heart, and a few battle scars. That’s what reclaimed white oak brings—seasoned by decades of weather and work in old barns across the South.

At BeechCreek Timber Co., we hunt down the best of it, pull the nails, clean it up, and turn it into custom pieces built to last another hundred years. From mantels to full-scale builds, we mill and prep every board with the kind of care you'd expect from folks who still love the smell of sawdust.

Product Description

Reclaimed Circular Sawn Oak Box Beams

Our box beams are crafted from authentic reclaimed white oak sourced from structures dating back to the 1800s, showcasing the unique character and history of the wood.

• 2, 3 or 4 -sided box construction with outside dimensions as listed above
• Corners mitered for a clean, seamless appearance
• Backside planed and all visible faces sanded
• Natural color range of light to dark brown (Beige and Blond)
• Reclaimed Circular Sawn Oak varies in light to heavy circular saw marks
• These can be stained upon request
• Wire brushed or sanded finish are optional
• Bore care treatment applied for added protection and stability
• Built from barn wood siding that is anywhere from 60 to 200 years old
• Standard lead time: approximately 12 weeks

Each beam is one-of-a-kind, with natural variation in grain, stress cracks, nail holes, bug holes, knots, and patina that reflects its historic origin.

Installation

Here is what we recommend doing for installation. 

A skilled installer/builder with experience in similar projects is suggested although many DIYers have completed installation on their owner. We are here to assist in any way we can, however, we do not install.

Allow wood products to acclimate to the environment before installation storing in a well ventilated area. Make sure they stay dry and all surrounding area is dry as well. We suggest giving the wood 2-3 days for this. 

Maintaining proper temperature and humidity levels before, during, and after installation is very important as wood can expand and contract depending on the environment. 

Saw beams on one edge to the length needed for a flush mount. 

Box Beams

• Install Support Brackets: Use wood 2'x4'-10' for brackets or other support structures to anchor the beams securely to the ceiling or wall. Make sure the brackets are properly spaced and aligned. You may have to rip down the 2"x4"-10' to match the inside dimension of the box beam.
• Attach the Beams: Lift the wood box beams into place and attach them to the support brackets using lag bolts or screws. Ensure that the 

RECOMMENDED TOOLS AND SUPPLIES 

• Lag Bolts
• 2'x4'-10'
• Level 
• Skill saw
• Speed square
• Wrenches 
• Ladders/Scaffolding 
• Braces 
• Drill & Bits 
• Trim screws

CARE & MAINTENANCE 

Use recommended cleaning products and pads. Consider applying a finish for long-term protection of the beams

HOw To Measure

1. Measure the length:

 Determine the length of the box beam you need by measuring the distance between the two points where the beam will be installed. Be sure to measure precisely to avoid any gaps or overhangs. 

2. Measure the width:

Measure the width of the box beam by determining how wide you want the beam to be. This will depend on your design preferences and the dimensions of the space where the beam will be installed. 

3. Measure the height: 

Measure the height of the box beam by determining how tall you want the beam to be. This will also depend on your design preferences and the overall look you're trying to achieve. 

4. Consider additional details: 

If your box beams have any special features such as decorative trim, end caps, or other customizations, be sure to measure these as well to ensure that the final product matches your specifications. 

5. Chat with us: 

Once you have your measurements, reach out to us to confirm that your measurements are accurate and to discuss any additional details or customization.